Tungsten Heavy Alloy products are offered as machinable blanks or as precision machined parts to customer specification and used in many different applications as listed below.
The main problem that may occur during the milling process is the possibility that chips may choke the tool. If a milling cutter is finally choked, it cannot carry out chips any more and the feeding force of the spindle will break it.
Designing for Carbide Designing for Carbide requires special considerations in the area of selecting safety factors based on stress, toughness, impact and corrosion characteristics. Components should be designed within these parameters for optimum performance.
The hardness of the metal is the ability of the metal material to resist local deformation, especially plastic deformation, indentation or scratching. It is an indicator to measure the degree of softness and hardness of the metal material.
Forging can be divided into free forging, die forging, rolling ring, special forging.1. Free forging. Refers to the processing method of forgings that use simple universal tools or directly apply force to the billet between the upper and lower anvils of the forging equipment to deform the billet to
The cemented carbide pulse nozzle is based on the principle of self-oscillation, relying on the self-oscillation chamber of the nozzle itself to convert the continuous jet into a pulsed jet, that is, the jet flows into the water chamber from the different flow in the upper section of the nozzle
Forged flange and cast flange are two different technologies in the flange production and manufacturing process. Each technology has its own characteristics. Flange manufacturers will reasonably choose according to different forging characteristics to produce high-quality flange.
Molybdenum sputtering targets, ie molybdenum targets, are usually formed by sintering molybdenum powder. Molybdenum sputtering targets can form thin films on various substrates, and such sputtering films are widely used as electronic components and electronic products.
The ultra-fine tungsten wire can be prepared by electrolytic corrosion method, wherein the ultra-fine tungsten wire with a diameter of less than 7 μm is the main raw material for preparing the load of the Z-pinch wire array.
