Carbide atomization nozzle atomization can be divided into pressure atomization, rotating atomization, electrostatic atomization, ultrasonic atomization and bubble atomization.

Tungsten powder is made from tungsten oxide in the four-tube muffle furnace or multi-tube furnace with hydrogen reduction with particle size from 0.6-30 microns. Mainly has coarse, medium and fine granularity, silver gray powder, impurity content based on national standards.

Molybdenum wire is made from molybdenum rods with series of processing such as hot-rolling, forging, drawing and made into a variety of specifications. Molybdenum wire often breaks in the drawing production process , resulting in molybdenum wire into the material rate.

Coal-water slurry is a new coal-based liquid fuel that emerged from the 1970s, consisting mainly of 65% coal, 34% water and 1% chemical additives. Compared with other types of fuel, it has many advantages, such as low sulfur content, high combustion efficiency.

The recrystallization temperature of lanthanum-doped molybdenum wire is higher than pure molybdenum wire, and it is because small amount of La2O3 can improve the properties and structure of molybdenum wire. Besides, La2O3 second phase effect can also increase the room temperature strength of the mol

Under normal temperature, MoSi2 element is very brittleness, while under high temperature, it is plasticity, so the better way to install U Shape element is to hang it vertically from the furnace top through the support clamping chuck. The aim of such way is to avoid putting the mechanical stress directly to the element heat-generating end; otherwise the element will easily be broken.

Tungsten carbide is a new tool material, because of its excellent performances such as high hardness, wear resistance, compressive strength, more chaos chemical resistance, adhesion and heat resistance, carbide tools has cutting efficiency 5-10 times than high-speed steel cutting tools , and it can be used for machining of high hardness materials which high-speed steel cutting tools can not do, tungsten carbide has earned a large proportion in tool materials.

Wolfram Carbide is a black hexagonal crystal with metallic luster and its hardness is close to diamond. It is a good conductor of electricity and heat. Melting point 2870 ℃, boiling point 6000 ℃, the relative density of 15.63 (18 ℃).

Carbide inserts, with its excellent performance in the electronics industry, become the general tool sof PCB electronics industry, and have joined into development of this industry.