You are here: Home » Products » Tungsten Carbide Products » Tungsten Cemented Carbide Nozzle


Share to:
sharethis sharing button

Tungsten Cemented Carbide Nozzle

Cemented carbide nozzles are made by hot pressing and sintering of hot straight holes and hill holes. Due to its hardness, low density, and excellent resistance to wear and corrosion, cemented carbide nozzles have been widely used in sand blasting and shot blasting equipment, ensuring that the products are used for a long time in the best air and abrasives.
  • Customized


  • Material Greade: YG9C, YG11C, ZK30UF
  • OEM: Available
  • Applications: Sand blasting spray
  • OEM: Supplied
  • Tolerance: +/-0.02mm
Cemented Carbide Nozzle Applications:
Cemented carbide nozzles are mainly used to cool the teeth, flush mud and clean the bottoms of wells when working on tools such as PDC bits and roller bits for oil and gas drilling. Cemented carbide has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance. In particular, its high hardness and wear resistance remain basically unchanged even at a temperature of 500 ° C. , Still high hardness at 1000 ℃. Cemented carbide is widely used as tool materials, such as turning tools, milling cutters, planers, drills, boring tools, etc., for cutting cast iron, non-ferrous metals, plastics, chemical fiber, graphite, glass, stone, and ordinary steels. It can also be used for cutting Refractory materials such as heat-resistant steel, stainless steel, high-manganese steel, and tool steel. Carbide nozzles offer economical and longer service life when inevitable ground handling and media used to cut abrasives (glass beads, steel shots, grit, minerals or cinders). Traditionally, cemented carbide is the material of choice for cemented carbide nozzles. Carbide nozzles are widely used in surface treatment, sandblasting, painting, electronics, chemical processes and other industries.
Advantages of Cemented Carbide Nozzle:
Corrosion resistance, long service life, excellent performance, high cost performance, not easy to wear.

Grade Physical Performance Applications
Density g/cm3 Hardness HRA Tensile Strength N/mm2
YG9C 14.4514.65 87.288.6 ≥2200 Excellent wear resistance and strength. Mainly used to make nozzles of PDC drills and dental drills.
YG11C 14.2014.40 86.588.0 ≥2300 Good wear resistance and anti-impact. Mainly used to make high pressure nozzles in oil, chemical and mechanical industries. 

We have an excellent technical team, our products in quality and quantity will make you satisfied, welcome to buy
  • +86-13995656368
  • Mon-Fri: 09:00AM - 06:00PM
  • Guanggu Avenue 52#, Hongshan, Wuhan, Hubei province, P.R.China. 430074
Contact us NOW
Incorrect E-mail
Follow Us
Copyright ©2022 Hubei Fotma Machinery Co., Ltd.