Moly-D U-shape Molybdenum Disilicide Mosi2 Heating Elements
Description: These custom heating elements are known for their longevity and reliability at a high temperature. The U shaped elements are most frequently used suspended with the bottom of the "U" down. The element consists of two cold ends (Lu) and a U-shaped hot section (Le).
The cold ends are twice the diameter of the hot section and are attached by a weld. The extremities of the cold ends are metallized with aluminum to provide a low-resistance contact surface to which the electrical connections are made with flat braided aluminum straps. These elements are available in two grades: MS1700 for element temperatures up to 1700 deg C and MS1800 for element temperatures up to 1850 deg C.
Parameters:
Hot Zone/Cold End Diameter: 3/6, 4/9, 5/10,6/12, 7/14 9/18 or 12/24;
Hot zone length- Le;
On-center distance between legs:-a
Number of shanks: Two
Operating temperature of furnace: Grade MD-31 or MD-33;
Grade 1800, D1=3mm, D2=6mm, Le=5.5in., Lu=5in., A=0.98in.
Specify as: MOSI2, 18-3/6-5.5-5-0.98in
Grade 1700, D1=6mm, D2= 12mm, Le=300mm, Lu=250mm, A=50m
Specify as: MOSI2, 17-6/12-300-250-50mm