You are here: Home » Products » Heating Element » L Bent MoSi2 Heating Elements
Share to:

L Bent MoSi2 Heating Elements

The cold ends (Lu) of the Moly-D Elements can be bent 30A。, 45Ao or 90A0. This permits the installation of more than one layer of elements on a wall of a furmace with a high chamber. Most are bent in the cold end (Lu) but they can also be bent in the hot section (Le).
  • L Bent
  • FOTMA
Quantity:
L bent MoSi2 heating elements

  The cold ends (Lu) of the Moly-D Elements can be bent 30A, 45Ao or 90A0. This permits the installation of more than one layer of elements on a wall of a furmace with a high chamber. Most are bent in the cold end (Lu) but they can also be bent in the hot section (Le).
 
L Bent MoSi2 Heating Elements

  Molybdenum disilicide MoSi2 heating elements are resistance type heating elements made of a dense ceramic- metallic material which can produce furnace temperatures approaching 1800°C. Although more expensive than traditional metallic elements, MoSi2 elements are known for their longevity due in part to a protective quartz layer that forms on the surface of the element“hot zone" during operation.
 
L Bent MoSi2 Heating Elements

  Duralite MoSi2 elements are made to industry standard established resistance values, dimensions and geometries, and therefore are interchangeable with other manufacturers of molybdenum disilicide elements. The key difference between STA
MoSi2 and other MoSi2 suppliers is that STA MoSi2 elements are exceptionally priced.

L Bent MoSi2 Heating Elements


L Bent MoSi2 Heating Elements

L Bent MoSi2 Heating Elements


Previous: 
Next: 
We have an excellent technical team, our products in quality and quantity will make you satisfied, welcome to buy
  • +86-13995656368
  • Mon-Fri: 09:00AM - 06:00PM
  • Guanggu Avenue 52#, Hongshan, Wuhan, Hubei province, P.R.China. 430074
CONTACT US
Contact us NOW
Incorrect E-mail
Follow Us
Copyright ©2022 Hubei Fotma Machinery Co., Ltd.