Because recrystallization TZM alloy at room temperature is fragile and it is hard to deform. So before cool and warm rolling should avoid annealing at perfect recrystallization.
Both cast flanges and forged flanges are commonly used flanges. The cast flanges have accurate rough shape and size, small processing volume, low cost, but have casting defects
X-ray protection tungsten alloy baffle refers to a tungsten alloy plate made of tungsten-nickel-iron alloy or tungsten-nickel-copper alloy, and its X-ray protection effect is better than that of traditional lead block.
TZM alloy has good high temperature mechanical property, but at a high temperature oxidation resistance property is poor. Under high temperature, it unable to form a protective oxide layer, so it must be used at high temperatures in non-oxidizing atmosphere. When the temperature is below 400 ℃
Molybdenum is widely used in heating elements due to its high melting point, high boiling point, and good electrical and thermal conductivity. Mainly include molybdenum conductive rod, molybdenum heating element, molybdenum heating belt and so on.1. Molybdenum conductive rodThe molybdenum conductive
When forging cast iron manhole covers, there will be many factors that affect the quality of our forged cast iron manhole covers. Today, we will briefly introduce the factors that affect the quality of cast iron manhole covers.
Tungsten alloy military aircraft balance pieces are of great significance to the balance, stability and maneuverability of military aircraft.
The strengthening mechanism of TZM alloy is divided into: solid solution strengthening, second phase strengthening and deformation strengthening.