中文      English

Search

  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
News

News

You are here: Home » News » Product News

Product News

  • [Product News] How to Choose Molybdenum Electrode

    General molybdenum electrode diameter between 35 ~ 75mm, and the choice of molybdenum electrode size is mainly based on the size of the current density to determine.

  • [Product News] Tungsten Carbide Atomization Nozzle

    Carbide atomization nozzle atomization can be divided into pressure atomization, rotating atomization, electrostatic atomization, ultrasonic atomization and bubble atomization.

  • [Product News] Production of Tungsten Powder

    Tungsten powder is made from tungsten oxide in the four-tube muffle furnace or multi-tube furnace with hydrogen reduction with particle size from 0.6-30 microns. Mainly has coarse, medium and fine granularity, silver gray powder, impurity content based on national standards.

  • [Product News] Why Molybdenum Wires Breaks?

    Molybdenum wire is made from molybdenum rods with series of processing such as hot-rolling, forging, drawing and made into a variety of specifications. Molybdenum wire often breaks in the drawing production process , resulting in molybdenum wire into the material rate.

  • [Product News] Carbide Nozzle for Coal Water Slurry

    Coal-water slurry is a new coal-based liquid fuel that emerged from the 1970s, consisting mainly of 65% coal, 34% water and 1% chemical additives. Compared with other types of fuel, it has many advantages, such as low sulfur content, high combustion efficiency.

  • [Product News] Lanthanum-doped Molybdenum Wire and Pure Molybdenum Wire

    The recrystallization temperature of lanthanum-doped molybdenum wire is higher than pure molybdenum wire, and it is because small amount of La2O3 can improve the properties and structure of molybdenum wire. Besides, La2O3 second phase effect can also increase the room temperature strength of the mol

  • [Product News] Installation of Heating Element for Electronics

    Under normal temperature, MoSi2 element is very brittleness, while under high temperature, it is plasticity, so the better way to install U Shape element is to hang it vertically from the furnace top through the support clamping chuck. The aim of such way is to avoid putting the mechanical stress directly to the element heat-generating end; otherwise the element will easily be broken.

  • [Product News] Development Trend of Carbide Cutting Tools: Improve Accuracy

    Tungsten carbide is a new tool material, because of its excellent performances such as high hardness, wear resistance, compressive strength, more chaos chemical resistance, adhesion and heat resistance, carbide tools has cutting efficiency 5-10 times than high-speed steel cutting tools , and it can be used for machining of high hardness materials which high-speed steel cutting tools can not do, tungsten carbide has earned a large proportion in tool materials.


Copyright © Hubei Fotma Machinery Co.,Ltd   Powered by Fotma