Plate molybdenum electrodes are another form of side-wall type electrodes, mainly used in low-capacity single-phase electric melting furnace, but also suitable for required low current density and uniform energy release certain glass electric furnaces.

Tungsten lamp filaments, which operate at temperatures in the range of 2400° C, are successfully mounted on molybdenum wire; the wire acting both as a heat sink and a support while lowering the temperature at the support junction.

Today we take a look at the preforming and forming process of train wheel forging. Among them, the forming process of train wheel forgings is the key process for matching the rolling capacity of thermoforming units.

Molybdenum alloy is a non-ferrous alloy composed of molybdenum as a matrix and adding other elements. Its alloys are mainly divided into TZM and TZC molybdenum alloys, MHC and ZHM alloys, Mo-W alloys, Mo-Re alloys, MH and KW molybdenum alloys.

Molybdenum is a metallic, silvery-white element which is very stable chemically but it will react with acids. The physical characteristic that makes molybdenum unique is that it has a very high melting point, 4,730 degrees Fahrenheit. This is 2,000 degrees higher than the melting point of steel.

With the development of modern electronic technology, the requirements for film-forming quality of semiconductor devices are getting higher and higher, thus promoting the progress of vacuum deposition technology, of which RF sputtering is a better film-forming method.

Indexable carbide inserts are the industry workhorses. Even though these carbide inserts cost less than some other tools, they have the loosest tolerances, from 0 to 0.012 in., depending on the ratio of length to diameter.

CT machine is a common medical equipment in modern medicine, which mainly uses X-rays for image diagnosis. For X-rays, effective shielding protection is required to ensure the safety of professional operators and the public.