You are here: Home » Related Searches » Product News

Product News

Both cast flanges and forged flanges are commonly used flanges. The cast flanges have accurate rough shape and size, small processing volume, low cost, but have casting defects

20

07-2020

TZM Alloy Oxidation Resistance Property
TZM alloy has good high temperature mechanical property, but at a high temperature oxidation resistance property is poor. Under high temperature, it unable to form a protective oxide layer, so it must be used at high temperatures in non-oxidizing atmosphere. When the temperature is below 400 ℃

17

07-2020

Application of Molybdenum on Heating Elements
Molybdenum is widely used in heating elements due to its high melting point, high boiling point, and good electrical and thermal conductivity. Mainly include molybdenum conductive rod, molybdenum heating element, molybdenum heating belt and so on.1. Molybdenum conductive rodThe molybdenum conductive

15

07-2020

Factors Affecting the Quality of Cast Iron Manhole Cover
When forging cast iron manhole covers, there will be many factors that affect the quality of our forged cast iron manhole covers. Today, we will briefly introduce the factors that affect the quality of cast iron manhole covers.

14

07-2020

Tungsten Alloy Aircraft Balance
Tungsten alloy military aircraft balance pieces are of great significance to the balance, stability and maneuverability of military aircraft.

09

07-2020

Selection and Technical Application of Cemented Carbide Drill
The cemented carbide is made of tungsten carbide powder as a matrix, and is pressed and sintered with cobalt powder as a binder. Usually contains 94% tungsten carbide and 6% cobalt. Because of its high hardness, it is very wear-resistant and has a certain strength, suitable for high-speed cutting.

08

07-2020

How to Choose Tooth Form of Tungsten Carbide Saw Blade?
There are many kinds of tooth forms for tungsten carbide saw blades, including flat teeth, trapezoid flat teeth, left and right teeth, dovetail teeth, inverted trapezoidal teeth, and so on.

06

07-2020

How to Choose the Sawtooth Angle of Carbide Saw Blade?
How to choose the sawtooth angle of carbide saw blade? The angle parameters of the sawtooth portion of the saw blade are more complicated. The correct selection of the angle parameter of the saw blade is the key to determine the cutting quality.

03

07-2020

Introduction of Tungsten Carbide Saw Blade
Carbide saw blades are the most commonly used cutting tools for processing wood products, and are often used for sawing and grooving metal materials. The quality of cemented carbide saw blades is closely related to the quality of the workpieces to be processed.

02

07-2020

Effect of Deformation Degree on Mechanical Properties of TZM Alloy at Room Temperature
The degree of deformation is one of the main factors affecting the densification process of the TZM alloy slab, and it also ultimately affects the mechanical properties of the TZM alloy slab. When the TZM alloy plate is rolled,the degree of deformation of the material is expressed by the compression
  • Total 24 pages  Go to Page
  • Go
We have an excellent technical team, our products in quality and quantity will make you satisfied, welcome to buy
  • +86-13995656368
  • Mon-Fri: 09:00AM - 06:00PM
  • Guanggu Avenue 52#, Hongshan, Wuhan, Hubei province, P.R.China. 430074
CONTACT US
Contact us NOW
Incorrect E-mail
Follow Us
Copyright ©2022 Hubei Fotma Machinery Co., Ltd.