Titanium manufacturer, exporter, supplier and distributor from China.
Titanium wire, CP Ti wire used for redrawing, welding, mesh weaving, making optical frame, needles, electrode, etc. We supply commercially Pure, Alloy, and Eli Grade Titanium Wire
Titanium and its alloy plates are available from us. The titanium plates are produced according to ASTM, DIN, JIS etc standard , meeting all kinds need of the customers around the wourld. Had been exported to many countries in USA and Europe.
titanium screws are used in the nautical field and in the sailing sector for their anticorrosion, mechanical resistance, lightness and nonmagnetic properties
Standard: ASTM B348,ASME SB348,AMS4928,ASTM F67,ASTM F136
Material Grade: Gr.1, Gr.2, Gr.5, Gr.7, Gr.12, Ti-6AL-4V,Ti- 6AL 4V ELI
Bar Size:Dia.3.0mm to 200mm x up to 6000mm length.
We produce various grades and sizes of Titanium bars according to the requests of customers.
Titanium Mesh Plate (Titanium Mesh Sheet) 1) Type: punched 2) Grades: Gr. 1, Gr. 2, Gr. 3 3) Sheet sizes: A) Thickness: 0. 5-1. 5mm
Titanium has a melting point of 1660 +/- 10'C, boiling point of 3287'C, specific gravity of 4.54, with a valence of 2, 3, or 4. Pure titanium is a lustrous white metal with low density, high strength, and high corrosion resistance.
Titanium and Titanium alloys are non-ferrous metals with excellent corrosion resistance, fatigue properties, and high strength-to-weight ratios. Products differ in terms of composition, grade, shape, dimensions, and features. Commercially pure, unalloyed or very low alloy titanium does not contain or contains only very small amounts of alloying elements.
Titanium has a high melting point of 3135'F (1725'C). This melting point is approximately 400'F (220'C) above the melting point of steel and approximately 2000'F (1100'C) above that of aluminum.
Titanium s a lustrous, white metal when pure. Titanium minerals are quite common. The metal has a low density, good strength, is easily fabricated, and has excellent corrosion resistance. The metal burns in air and is the only element that burns in nitrogen. It is marvellous in fireworks.
Titanium is resistant to dilute sulphuric and hydrochloric acid, most organic acids, damp chlorine gas, and chloride solutions. Titanium metal is considered to be physiologically inert.
Titanium is present in meteorites and in the sun. Some lunar rocks contain high concentrations of the dioxide, TiO2. Titanium oxide bands are prominent in the spectra of M-type stars.
The reaction between titanium metal and potassium perchlorate (KClO4) (only to be demonstrated by a professionally qualified chemist following a legally satisfactory hazard asessment).
Isolation: Titanium is readily available from commercial sources so preparation in the laboratory is not normally required. In industry, reduction of ores with carbon is not a useful option as intractable carbides are produced. The Kroll method is used on large scales and involves the action of chlorine and carbon upon ilmenite (TiFeO3) or rutile (TiO2). The resultant titanium tetrachloride, TiCl4, is separated from the iron trichloride, FeCl3, by fractional distillation. Finally TiCl4 is reduced to metallic titanium by reduction with magnesium, Mg. Air is excluded so as to prevent contamination of the product with oxygen or nitrogen.
Excess magensium and magneium dichloride is removed from the product bytreatment with water and hydrochloric acid to leave a titanium "sponge". This can be melted under a helium or argon atmosphere to allow casting as bars.
Applications of Titanium:
Titanium is important as an alloying agent with aluminum, Molybdenum, manganese,iron, and other metals. Alloys of titanium are principally used for aircraft and missiles where lightweight strength and ability to withstand extremes of temperature are important.
Titanium is as strong as steel, but 45% lighter. It is 60% heavier than aluminum, but twice as strong.
Titanium has potential use in desalination plants for converting sea water into fresh water. The metal has excellent resistance to sea water and is used for propeller shafts
rigging, and other parts of ships exposed to salt water. A titanium anode coated with platinum has been used to provide cathodic protection from corrosion by salt water.
It is produced artificially for use as a gemstone, but it is relatively soft. Star sapphires and rubies exhibit their asterism as a result of the presence of TiO 2.
|More Related Subjects: